Commonly Asked Questions in Oil and Gas Interviews
Oil and Gas interview questions – Some of the most relevant interview questions commonly raised by the Oil and Gas Industry. Interviews are taken on a panel of 2 to 3 interviewers for typically 2 to 3 hours. These interviews can be conducted in person or virtually through various communication apps like Google Duo, Zoom, Microsoft Teams, or Skype. As the technology is advancing, most companies prefer virtual interviews for saving time and resources; therefore, candidates must prepare themselves to handle both formats professionally.
20 Essential Oil and Gas Interview Questions You Should Be Ready For
Here are 20 major Oil and Gas interview questions that one may expect on any interview. Most of them are meant to test your technical knowledge, problem-solving skills, and industry expertise. Preparing for all this will build your confidence and help you stand out as a well-rounded and competent candidate. Remember, every question is a chance to show your strengths and passion for the industry.
| # | Interview Question |
|---|---|
| 1 | What is ISO 8501-3 and it is related to which stage |
| 2 | Explain some of the welding defects encountered in painting |
| 3 | How much radius shall be maintained on the steel surfaces related to rough edges |
| 4 | What is a pre-inspection meeting |
| 5 | What is a pre-job conference meeting |
| 6 | What is thermal insulation and how many types of insulation are there |
| 7 | What type of Fireproofing is done on equipment and structures for offshore and onshore |
| 8 | What is TSA |
| 9 | What is the profile requirement for offshore TSA coating |
| 10 | What is the salt requirement for TSA coating |
| 11 | Explain in detail the sequences/stages for surface preparation and painting from start to finish |
| 12 | What will be your course of action if you observe some discrepancy during the mid-stage of painting activities |
| 13 | What is a re-coat interval and what action you will take if the recoat interval has exceeded |
| 14 | Mention the different coating systems in Oil & Gas fields |
| 15 | What are some of the fabrication defects found on steel surfaces and if found what will be your action |
| 16 | What is the paint storage requirement and what will you check on a paint tin |
| 17 | What will be your course of action when you find the salt contamination in excess of the project requirement |
| 18 | What salt contamination meter is used to check the Chloride salts |
| 19 | What is the difference between coating and painting |
| 20 | Explain the functioning of the Airless Spray Machine |
Conclusion:
Some of the most commonly seen interview questions in Oil and Gas include a range of areas to judge how technically adept you are, as well as problem-solving skills and in-depth knowledge of the industry itself. Please provide any more questions or your suggestions through comments below in comment section. Your efforts will make this list even more useful to any other person who is going to face an interview in related fields.
Suggested Posts
Holiday Detector | What are Holidays in Coating?
Rubber Lining | Rubber Lining Material | Vulcanization
Material Inspection – Coating Material | Simple Guide to Material Inspection for Coatings